aws ec2 revoke-security-group-ingress
Removes the specified ingress rules from a security group. To remove a rule, the values that you specify (for example, ports) must match the existing rule's values exactly. [EC2-Classic , default VPC] If the values you specify do not match the existing rule's values, no error is returned, and the output describes the security group rules that were not revoked. AWS recommends that you use DescribeSecurityGroups to verify that the rule has been removed. Each rule consists of the protocol and the CIDR range or source security group. For the TCP and UDP protocols, you must also specify the destination port or range of ports. For the ICMP protocol, you must also specify the ICMP type and code. If the security group rule has a description, you do not have to specify the description to revoke the rule. Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur
Options
| Name | Description |
|---|---|
--cidr-ip <string> | The CIDR IP address range. You can't specify this parameter when specifying a source security group |
--from-port <integer> | The start of port range for the TCP and UDP protocols, or an ICMP type number. For the ICMP type number, use -1 to specify all ICMP types |
--group-id <string> | The ID of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID |
--group-name <string> | [EC2-Classic, default VPC] The name of the security group. You must specify either the security group ID or the security group name in the request |
--ip-permissions <list> | The sets of IP permissions. You can't specify a source security group and a CIDR IP address range in the same set of permissions |
--ip-protocol <string> | The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). Use -1 to specify all |
--source-security-group-name <string> | [EC2-Classic, default VPC] The name of the source security group. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the start of the port range, the IP protocol, and the end of the port range. For EC2-VPC, the source security group must be in the same VPC. To revoke a specific rule for an IP protocol and port range, use a set of IP permissions instead |
--source-security-group-owner-id <string> | [EC2-Classic] The AWS account ID of the source security group, if the source security group is in a different account. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the IP protocol, the start of the port range, and the end of the port range. To revoke a specific rule for an IP protocol and port range, use a set of IP permissions instead |
--to-port <integer> | The end of port range for the TCP and UDP protocols, or an ICMP code number. For the ICMP code number, use -1 to specify all ICMP codes for the ICMP type |
--dry-run | Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation |
--no-dry-run | Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation |
--protocol <string> | The IP protocol: tcp | udp | icmp (VPC only) Use all to specify all protocols.If this argument is provided without also providing the port argument, then it will be applied to all ports for the specified protocol |
--port <string> | For TCP or UDP: The range of ports to allow. A single integer or a range (min-max).For ICMP: A single integer or a range (type-code) representing the ICMP type number and the ICMP code number respectively. A value of -1 indicates all ICMP codes for all ICMP types. A value of -1 just for type indicates all ICMP codes for the specified ICMP type |
--cidr <string> | The CIDR IP range |
--source-group <string> | The name or ID of the source security group |
--group-owner <string> | The AWS account ID that owns the source security group. Cannot be used when specifying a CIDR IP address |
--cli-input-json <string> | Performs service operation based on the JSON string provided. The JSON string follows the format provided by ``--generate-cli-skeleton``. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally |
--generate-cli-skeleton <string> | Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value ``input``, prints a sample input JSON that can be used as an argument for ``--cli-input-json``. If provided with the value ``output``, it validates the command inputs and returns a sample output JSON for that command |