aws ec2 create-transit-gateway-connect-peer
Creates a Connect peer for a specified transit gateway Connect attachment between a transit gateway and an appliance. The peer address and transit gateway address must be the same IP address family (IPv4 or IPv6). For more information, see Connect peers in the Transit Gateways Guide
Options
| Name | Description |
|---|---|
--transit-gateway-attachment-id <string> | The ID of the Connect attachment |
--transit-gateway-address <string> | The peer IP address (GRE outer IP address) on the transit gateway side of the Connect peer, which must be specified from a transit gateway CIDR block. If not specified, Amazon automatically assigns the first available IP address from the transit gateway CIDR block |
--peer-address <string> | The peer IP address (GRE outer IP address) on the appliance side of the Connect peer |
--bgp-options <structure> | The BGP options for the Connect peer |
--inside-cidr-blocks <list> | The range of inside IP addresses that are used for BGP peering. You must specify a size /29 IPv4 CIDR block from the 169.254.0.0/16 range. The first address from the range must be configured on the appliance as the BGP IP address. You can also optionally specify a size /125 IPv6 CIDR block from the fd00::/8 range |
--tag-specifications <list> | The tags to apply to the Connect peer |
--dry-run | Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation |
--no-dry-run | Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation |
--cli-input-json <string> | Performs service operation based on the JSON string provided. The JSON string follows the format provided by ``--generate-cli-skeleton``. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally |
--generate-cli-skeleton <string> | Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value ``input``, prints a sample input JSON that can be used as an argument for ``--cli-input-json``. If provided with the value ``output``, it validates the command inputs and returns a sample output JSON for that command |