aws ds add-ip-routes
If the DNS server for your on-premises domain uses a publicly addressable IP address, you must add a CIDR address block to correctly route traffic to and from your Microsoft AD on Amazon Web Services. AddIpRoutes adds this address block. You can also use AddIpRoutes to facilitate routing traffic that uses public IP ranges from your Microsoft AD on AWS to a peer VPC. Before you call AddIpRoutes, ensure that all of the required permissions have been explicitly granted through a policy. For details about what permissions are required to run the AddIpRoutes operation, see AWS Directory Service API Permissions: Actions, Resources, and Conditions Reference
Options
| Name | Description |
|---|---|
--directory-id <string> | Identifier (ID) of the directory to which to add the address block |
--ip-routes <list> | IP address blocks, using CIDR format, of the traffic to route. This is often the IP address block of the DNS server used for your on-premises domain |
--update-security-group-for-directory-controllers | If set to true, updates the inbound and outbound rules of the security group that has the description: "AWS created security group for directory ID directory controllers." Following are the new rules: Inbound: Type: Custom UDP Rule, Protocol: UDP, Range: 88, Source: 0.0.0.0/0 Type: Custom UDP Rule, Protocol: UDP, Range: 123, Source: 0.0.0.0/0 Type: Custom UDP Rule, Protocol: UDP, Range: 138, Source: 0.0.0.0/0 Type: Custom UDP Rule, Protocol: UDP, Range: 389, Source: 0.0.0.0/0 Type: Custom UDP Rule, Protocol: UDP, Range: 464, Source: 0.0.0.0/0 Type: Custom UDP Rule, Protocol: UDP, Range: 445, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 88, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 135, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 445, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 464, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 636, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 1024-65535, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 3268-33269, Source: 0.0.0.0/0 Type: DNS (UDP), Protocol: UDP, Range: 53, Source: 0.0.0.0/0 Type: DNS (TCP), Protocol: TCP, Range: 53, Source: 0.0.0.0/0 Type: LDAP, Protocol: TCP, Range: 389, Source: 0.0.0.0/0 Type: All ICMP, Protocol: All, Range: N/A, Source: 0.0.0.0/0 Outbound: Type: All traffic, Protocol: All, Range: All, Destination: 0.0.0.0/0 These security rules impact an internal network interface that is not exposed publicly |
--no-update-security-group-for-directory-controllers | If set to true, updates the inbound and outbound rules of the security group that has the description: "AWS created security group for directory ID directory controllers." Following are the new rules: Inbound: Type: Custom UDP Rule, Protocol: UDP, Range: 88, Source: 0.0.0.0/0 Type: Custom UDP Rule, Protocol: UDP, Range: 123, Source: 0.0.0.0/0 Type: Custom UDP Rule, Protocol: UDP, Range: 138, Source: 0.0.0.0/0 Type: Custom UDP Rule, Protocol: UDP, Range: 389, Source: 0.0.0.0/0 Type: Custom UDP Rule, Protocol: UDP, Range: 464, Source: 0.0.0.0/0 Type: Custom UDP Rule, Protocol: UDP, Range: 445, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 88, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 135, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 445, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 464, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 636, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 1024-65535, Source: 0.0.0.0/0 Type: Custom TCP Rule, Protocol: TCP, Range: 3268-33269, Source: 0.0.0.0/0 Type: DNS (UDP), Protocol: UDP, Range: 53, Source: 0.0.0.0/0 Type: DNS (TCP), Protocol: TCP, Range: 53, Source: 0.0.0.0/0 Type: LDAP, Protocol: TCP, Range: 389, Source: 0.0.0.0/0 Type: All ICMP, Protocol: All, Range: N/A, Source: 0.0.0.0/0 Outbound: Type: All traffic, Protocol: All, Range: All, Destination: 0.0.0.0/0 These security rules impact an internal network interface that is not exposed publicly |
--cli-input-json <string> | Performs service operation based on the JSON string provided. The JSON string follows the format provided by ``--generate-cli-skeleton``. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally |
--generate-cli-skeleton <string> | Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value ``input``, prints a sample input JSON that can be used as an argument for ``--cli-input-json``. If provided with the value ``output``, it validates the command inputs and returns a sample output JSON for that command |